滾子軸承設計安裝指南
安裝直線滾子空氣軸承的基本方法是外部和內部過渡配合。外裝時，軸承外表面有氣槽。這些凹槽容納氣流。如果使用多個軸承，可以插入墊片以確保整體配合。另一種安裝方法是在軸承上塗上粘合劑（小心地覆蓋軸承外徑）並將其插入安裝座，或通過軸承座上的孔注入環氧樹脂。 空氣軸承製造商。
避免軸承座中的軸承錯位至關重要，並且安裝載荷絕不會通過軸承的側板施加。如下圖，力應該施加到軸承本身的表面（中間部件）。
.png)
設計和安裝指南
- 滾子空氣軸承
- 推力空氣軸承
- 空氣襯套
- 平面空氣軸承
.png)
帶滾子空氣軸承的設計
典型配置：滾子空氣軸承輕輕壓入到軸上。軸承座可用於固定滾柱空氣軸承。如果使用客戶設計的軸承座，請聯繫 OAV 了解內徑尺寸建議。
滾子軸承由無摩擦軸承和端面軸環合二為一。因此，軸承的長度將是軸承系統的長度。除此之外，滾子空氣軸承具有與推力空氣襯套相同的設計準則。
Installing Into OAV Standard Housing Block
To mount the OAV Roller Air Bearing with its standard OAV housing, prepare the mounting surface by cleaning it free of debris and ensuring the surface is level and flat. Start by attaching the bottom piece housing, then carefully lower the bearing into the housing. Ensure proper alignment and fit. Add the top piece of the housing and press fit onto the roller air bearing to clip it to its bottom piece. Make sure the thread port of the roller air bearing is aligned with the top housing piece. Add the screws and create your final adjustments by securely fastening the housing. Be sure not to overtighten the screws, as it can affect alignment. Perform a functionality test and ensure proper alignments.
Figure 1. Graphical process depiction of OAV Roller Air Bearing mounted into its OAV Standard Roller Air Bearing Housing with thread port aligned with housing air hose entrance. Once top and bottom components are clicked, screw in to adjust as needed.